Top |
Functions
Types and Values
#define | NM_SETTING_BRIDGE_PORT_SETTING_NAME |
#define | NM_SETTING_BRIDGE_PORT_PRIORITY |
#define | NM_SETTING_BRIDGE_PORT_PATH_COST |
#define | NM_SETTING_BRIDGE_PORT_HAIRPIN_MODE |
#define | NM_SETTING_BRIDGE_PORT_VLANS |
NMSettingBridgePort |
Description
The NMSettingBridgePort object is a NMSetting subclass that describes optional properties that apply to bridge ports.
Functions
nm_setting_bridge_port_new ()
NMSetting *
nm_setting_bridge_port_new (void
);
Creates a new NMSettingBridgePort object with default values.
nm_setting_bridge_port_get_priority ()
guint16
nm_setting_bridge_port_get_priority (NMSettingBridgePort *setting
);
nm_setting_bridge_port_get_path_cost ()
guint16
nm_setting_bridge_port_get_path_cost (NMSettingBridgePort *setting
);
nm_setting_bridge_port_get_hairpin_mode ()
gboolean
nm_setting_bridge_port_get_hairpin_mode
(NMSettingBridgePort *setting
);
nm_setting_bridge_port_add_vlan ()
void nm_setting_bridge_port_add_vlan (NMSettingBridgePort *setting
,NMBridgeVlan *vlan
);
Appends a new vlan and associated information to the setting. The given vlan gets sealed and a reference to it is added.
Since: 1.18
nm_setting_bridge_port_get_num_vlans ()
guint
nm_setting_bridge_port_get_num_vlans (NMSettingBridgePort *setting
);
Since: 1.18
nm_setting_bridge_port_get_vlan ()
NMBridgeVlan * nm_setting_bridge_port_get_vlan (NMSettingBridgePort *setting
,guint idx
);
Since: 1.18
nm_setting_bridge_port_remove_vlan ()
void nm_setting_bridge_port_remove_vlan (NMSettingBridgePort *setting
,guint idx
);
Removes the vlan at index idx
.
Since: 1.18
nm_setting_bridge_port_remove_vlan_by_vid ()
gboolean nm_setting_bridge_port_remove_vlan_by_vid (NMSettingBridgePort *setting
,guint16 vid_start
,guint16 vid_end
);
Remove the VLAN with range vid_start
to vid_end
.
If vid_end
is zero, it is assumed to be equal to vid_start
and so the single-id VLAN with id vid_start
is removed.
Since: 1.18
nm_setting_bridge_port_clear_vlans ()
void
nm_setting_bridge_port_clear_vlans (NMSettingBridgePort *setting
);
Removes all configured VLANs.
Since: 1.18
Property Details
The “hairpin-mode”
property
“hairpin-mode” gboolean
Enables or disables "hairpin mode" for the port, which allows frames to be sent back out through the port the frame was received on.
Owner: NMSettingBridgePort
Flags: Read / Write
Default value: FALSE
The “path-cost”
property
“path-cost” guint
The Spanning Tree Protocol (STP) port cost for destinations via this port.
Owner: NMSettingBridgePort
Flags: Read / Write
Allowed values: <= 65535
Default value: 100
The “priority”
property
“priority” guint
The Spanning Tree Protocol (STP) priority of this bridge port.
Owner: NMSettingBridgePort
Flags: Read / Write
Allowed values: <= 63
Default value: 32
The “vlans”
property
“vlans” GPtrArray *
Array of bridge VLAN objects. In addition to the VLANs specified here, the port will also have the default-pvid VLAN configured on the bridge by the bridge.vlan-default-pvid property.
In nmcli the VLAN list can be specified with the following syntax:
$vid pvid [, $vid pvid]...
where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash.
[type GPtrArray(NMBridgeVlan)]
Owner: NMSettingBridgePort
Flags: Read / Write
Since: 1.18