cogl_pipeline_new ()

CoglPipeline *
cogl_pipeline_new (CoglContext *context);

Allocates and initializes a default simple pipeline that will color a primitive white.

Since: 2.0

Stability Level: Unstable

cogl_pipeline_copy ()

CoglPipeline *
cogl_pipeline_copy (CoglPipeline *source);

Creates a new pipeline with the configuration copied from the source pipeline.

We would strongly advise developers to always aim to use cogl_pipeline_copy() instead of cogl_pipeline_new() whenever there will be any similarity between two pipelines. Copying a pipeline helps Cogl keep track of a pipelines ancestry which we may use to help minimize GPU state changes.

Since: 2.0

Stability Level: Unstable

cogl_is_pipeline ()

CoglBool
cogl_is_pipeline (void *object);

Gets whether the given object references an existing pipeline object.

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_color ()

void
cogl_pipeline_set_color (CoglPipeline *pipeline,
                         const CoglColor *color);

Sets the basic color of the pipeline, used when no lighting is enabled.

Note that if you don't add any layers to the pipeline then the color will be blended unmodified with the destination; the default blend expects premultiplied colors: for example, use (0.5, 0.0, 0.0, 0.5) for semi-transparent red. See cogl_color_premultiply().

The default value is (1.0, 1.0, 1.0, 1.0)

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_color4ub ()

void
cogl_pipeline_set_color4ub (CoglPipeline *pipeline,
                            uint8_t red,
                            uint8_t green,
                            uint8_t blue,
                            uint8_t alpha);

Sets the basic color of the pipeline, used when no lighting is enabled.

The default value is (0xff, 0xff, 0xff, 0xff)

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_color4f ()

void
cogl_pipeline_set_color4f (CoglPipeline *pipeline,
                           float red,
                           float green,
                           float blue,
                           float alpha);

Sets the basic color of the pipeline, used when no lighting is enabled.

The default value is (1.0, 1.0, 1.0, 1.0)

Since: 2.0

Stability Level: Unstable

cogl_pipeline_get_color ()

void
cogl_pipeline_get_color (CoglPipeline *pipeline,
                         CoglColor *color);

Retrieves the current pipeline color.

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_ambient ()

void
cogl_pipeline_set_ambient (CoglPipeline *pipeline,
                           const CoglColor *ambient);

Sets the pipeline's ambient color, in the standard OpenGL lighting model. The ambient color affects the overall color of the object.

Since the diffuse color will be intense when the light hits the surface directly, the ambient will be most apparent where the light hits at a slant.

The default value is (0.2, 0.2, 0.2, 1.0)

Since: 2.0

Stability Level: Unstable

cogl_pipeline_get_ambient ()

void
cogl_pipeline_get_ambient (CoglPipeline *pipeline,
                           CoglColor *ambient);

Retrieves the current ambient color for pipeline

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_diffuse ()

void
cogl_pipeline_set_diffuse (CoglPipeline *pipeline,
                           const CoglColor *diffuse);

Sets the pipeline's diffuse color, in the standard OpenGL lighting model. The diffuse color is most intense where the light hits the surface directly - perpendicular to the surface.

The default value is (0.8, 0.8, 0.8, 1.0)

Since: 2.0

Stability Level: Unstable

cogl_pipeline_get_diffuse ()

void
cogl_pipeline_get_diffuse (CoglPipeline *pipeline,
                           CoglColor *diffuse);

Retrieves the current diffuse color for pipeline

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_ambient_and_diffuse ()

void
cogl_pipeline_set_ambient_and_diffuse (CoglPipeline *pipeline,
                                       const CoglColor *color);

Conveniently sets the diffuse and ambient color of pipeline at the same time. See cogl_pipeline_set_ambient() and cogl_pipeline_set_diffuse().

The default ambient color is (0.2, 0.2, 0.2, 1.0)

The default diffuse color is (0.8, 0.8, 0.8, 1.0)

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_emission ()

void
cogl_pipeline_set_emission (CoglPipeline *pipeline,
                            const CoglColor *emission);

Sets the pipeline's emissive color, in the standard OpenGL lighting model. It will look like the surface is a light source emitting this color.

The default value is (0.0, 0.0, 0.0, 1.0)

Since: 2.0

Stability Level: Unstable

cogl_pipeline_get_emission ()

void
cogl_pipeline_get_emission (CoglPipeline *pipeline,
                            CoglColor *emission);

Retrieves the pipelines current emission color.

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_specular ()

void
cogl_pipeline_set_specular (CoglPipeline *pipeline,
                            const CoglColor *specular);

Sets the pipeline's specular color, in the standard OpenGL lighting model. The intensity of the specular color depends on the viewport position, and is brightest along the lines of reflection.

The default value is (0.0, 0.0, 0.0, 1.0)

Since: 2.0

Stability Level: Unstable

cogl_pipeline_get_specular ()

void
cogl_pipeline_get_specular (CoglPipeline *pipeline,
                            CoglColor *specular);

Retrieves the pipelines current specular color.

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_shininess ()

void
cogl_pipeline_set_shininess (CoglPipeline *pipeline,
                             float shininess);

Sets the shininess of the pipeline, in the standard OpenGL lighting model, which determines the size of the specular highlights. A higher shininess will produce smaller highlights which makes the object appear more shiny.

The default value is 0.0

Since: 2.0

Stability Level: Unstable

cogl_pipeline_get_shininess ()

float
cogl_pipeline_get_shininess (CoglPipeline *pipeline);

Retrieves the pipelines current emission color.

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_alpha_test_function ()

void
cogl_pipeline_set_alpha_test_function (CoglPipeline *pipeline,
                                       CoglPipelineAlphaFunc alpha_func,
                                       float alpha_reference);

Before a primitive is blended with the framebuffer, it goes through an alpha test stage which lets you discard fragments based on the current alpha value. This function lets you change the function used to evaluate the alpha channel, and thus determine which fragments are discarded and which continue on to the blending stage.

The default is COGL_PIPELINE_ALPHA_FUNC_ALWAYS

Since: 2.0

Stability Level: Unstable

COGL_BLEND_STRING_ERROR

#define COGL_BLEND_STRING_ERROR (cogl_blend_string_error_quark ())

CoglError domain for blend string parser errors

Since: 1.0

cogl_pipeline_set_blend ()

CoglBool
cogl_pipeline_set_blend (CoglPipeline *pipeline,
                         const char *blend_string,
                         CoglError **error);

If not already familiar; please refer here for an overview of what blend strings are, and their syntax.

Blending occurs after the alpha test function, and combines fragments with the framebuffer.

Currently the only blend function Cogl exposes is ADD(). So any valid blend statements will be of the form:

1

<channel-mask>=ADD(SRC_COLOR*(<factor>), DST_COLOR*(<factor>))

This is the list of source-names usable as blend factors:

The source names can be used according to the

so for example "(1-SRC_COLOR[A])" would be a valid factor, as would "(CONSTANT[RGB])"

These can also be used as factors:

"RGB = ADD(SRC_COLOR*(SRC_COLOR[A]), DST_COLOR*(1-SRC_COLOR[A]))"
"A   = ADD(SRC_COLOR, DST_COLOR*(1-SRC_COLOR[A]))"
  

"RGBA = ADD(SRC_COLOR, DST_COLOR*(1-SRC_COLOR[A]))"
  

The default blend string is:

1

RGBA = ADD (SRC_COLOR, DST_COLOR*(1-SRC_COLOR[A]))

That gives normal alpha-blending when the calculated color for the pipeline is in premultiplied form.

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_blend_constant ()

void
cogl_pipeline_set_blend_constant (CoglPipeline *pipeline,
                                  const CoglColor *constant_color);

When blending is setup to reference a CONSTANT blend factor then blending will depend on the constant set with this function.

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_point_size ()

void
cogl_pipeline_set_point_size (CoglPipeline *pipeline,
                              float point_size);

Changes the size of points drawn when COGL_VERTICES_MODE_POINTS is used with the attribute buffer API. Note that typically the GPU will only support a limited minimum and maximum range of point sizes. If the chosen point size is outside that range then the nearest value within that range will be used instead. The size of a point is in screen space so it will be the same regardless of any transformations.

If the point size is set to 0.0 then drawing points with the pipeline will have undefined results. This is the default value so if an application wants to draw points it must make sure to use a pipeline that has an explicit point size set on it.

Since: 2.0

Stability Level: Unstable

cogl_pipeline_get_point_size ()

float
cogl_pipeline_get_point_size (CoglPipeline *pipeline);

Get the size of points drawn when COGL_VERTICES_MODE_POINTS is used with the vertex buffer API.

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_per_vertex_point_size ()

CoglBool
cogl_pipeline_set_per_vertex_point_size
                               (CoglPipeline *pipeline,
                                CoglBool enable,
                                CoglError **error);

Sets whether to use a per-vertex point size or to use the value set by cogl_pipeline_set_point_size(). If per-vertex point size is enabled then the point size can be set for an individual point either by drawing with a CoglAttribute with the name ‘cogl_point_size_in’ or by writing to the GLSL builtin ‘cogl_point_size_out’ from a vertex shader snippet.

If per-vertex point size is enabled and this attribute is not used and cogl_point_size_out is not written to then the results are undefined.

Note that enabling this will only work if the COGL_FEATURE_ID_PER_VERTEX_POINT_SIZE feature is available. If this is not available then the function will return FALSE and set a CoglError.

Since: 2.0

Stability Level: Unstable

cogl_pipeline_get_per_vertex_point_size ()

CoglBool
cogl_pipeline_get_per_vertex_point_size
                               (CoglPipeline *pipeline);

Since: 2.0

Stability Level: Unstable

cogl_pipeline_get_color_mask ()

CoglColorMask
cogl_pipeline_get_color_mask (CoglPipeline *pipeline);

Gets the current CoglColorMask of which channels would be written to the current framebuffer. Each bit set in the mask means that the corresponding color would be written.

Since: 1.8

Stability Level: Unstable

cogl_pipeline_set_color_mask ()

void
cogl_pipeline_set_color_mask (CoglPipeline *pipeline,
                              CoglColorMask color_mask);

Defines a bit mask of which color channels should be written to the current framebuffer. If a bit is set in color_mask that means that color will be written.

Since: 1.8

Stability Level: Unstable

cogl_pipeline_set_depth_state ()

CoglBool
cogl_pipeline_set_depth_state (CoglPipeline *pipeline,
                               const CoglDepthState *state,
                               CoglError **error);

This commits all the depth state configured in state struct to the given pipeline . The configuration values are copied into the pipeline so there is no requirement to keep the CoglDepthState struct around if you don't need it any more.

Note: Since some platforms do not support the depth range feature it is possible for this function to fail and report an error .

Since: 2.0

Stability Level: Unstable

cogl_pipeline_get_depth_state ()

void
cogl_pipeline_get_depth_state (CoglPipeline *pipeline,
                               CoglDepthState *state_out);

Retrieves the current depth state configuration for the given pipeline as previously set using cogl_pipeline_set_depth_state().

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_cull_face_mode ()

void
cogl_pipeline_set_cull_face_mode (CoglPipeline *pipeline,
                                  CoglPipelineCullFaceMode cull_face_mode);

Sets which faces will be culled when drawing. Face culling can be used to increase efficiency by avoiding drawing faces that would get overridden. For example, if a model has gaps so that it is impossible to see the inside then faces which are facing away from the screen will never be seen so there is no point in drawing them. This can be acheived by setting the cull face mode to COGL_PIPELINE_CULL_FACE_MODE_BACK.

Face culling relies on the primitives being drawn with a specific order to represent which faces are facing inside and outside the model. This order can be specified by calling cogl_pipeline_set_front_face_winding().

Status: Unstable

Since: 2.0

cogl_pipeline_set_front_face_winding ()

void
cogl_pipeline_set_front_face_winding (CoglPipeline *pipeline,
                                      CoglWinding front_winding);

The order of the vertices within a primitive specifies whether it is considered to be front or back facing. This function specifies which order is considered to be the front faces. COGL_WINDING_COUNTER_CLOCKWISE sets the front faces to primitives with vertices in a counter-clockwise order and COGL_WINDING_CLOCKWISE sets them to be clockwise. The default is COGL_WINDING_COUNTER_CLOCKWISE.

Status: Unstable

Since: 2.0

cogl_pipeline_set_layer_texture ()

void
cogl_pipeline_set_layer_texture (CoglPipeline *pipeline,
                                 int layer_index,
                                 CoglTexture *texture);

cogl_pipeline_set_layer_null_texture ()

void
cogl_pipeline_set_layer_null_texture (CoglPipeline *pipeline,
                                      int layer_index,
                                      CoglTextureType texture_type);

Sets the texture for this layer to be the default texture for the given type. This is equivalent to calling cogl_pipeline_set_layer_texture() with NULL for the texture argument except that you can also specify the type of default texture to use. The default texture is a 1x1 pixel white texture.

This function is mostly useful if you want to create a base pipeline that you want to create multiple copies from using cogl_pipeline_copy(). In that case this function can be used to specify the texture type so that any pipeline copies can share the internal texture type state for efficiency.

Since: 1.10

Stability Level: Unstable

cogl_pipeline_get_layer_texture ()

CoglTexture *
cogl_pipeline_get_layer_texture (CoglPipeline *pipeline,
                                 int layer_index);

Since: 1.10

Stability Level: Unstable

cogl_pipeline_set_layer_filters ()

void
cogl_pipeline_set_layer_filters (CoglPipeline *pipeline,
                                 int layer_index,
                                 CoglPipelineFilter min_filter,
                                 CoglPipelineFilter mag_filter);

Changes the decimation and interpolation filters used when a texture is drawn at other scales than 100%.

Since: 1.10

Stability Level: Unstable

cogl_pipeline_get_layer_min_filter ()

CoglPipelineFilter
cogl_pipeline_get_layer_min_filter (CoglPipeline *pipeline,
                                    int layer_index);

Retrieves the currently set minification CoglPipelineFilter set on the specified layer. The miniifcation filter determines how the layer should be sampled when down-scaled.

The default filter is COGL_PIPELINE_FILTER_LINEAR but this can be changed using cogl_pipeline_set_layer_filters().

Since: 1.10

Stability Level: Unstable

cogl_pipeline_get_layer_mag_filter ()

CoglPipelineFilter
cogl_pipeline_get_layer_mag_filter (CoglPipeline *pipeline,
                                    int layer_index);

Retrieves the currently set magnification CoglPipelineFilter set on the specified layer. The magnification filter determines how the layer should be sampled when up-scaled.

The default filter is COGL_PIPELINE_FILTER_LINEAR but this can be changed using cogl_pipeline_set_layer_filters().

Since: 1.10

Stability Level: Unstable

cogl_pipeline_set_layer_wrap_mode ()

void
cogl_pipeline_set_layer_wrap_mode (CoglPipeline *pipeline,
                                   int layer_index,
                                   CoglPipelineWrapMode mode);

Sets the wrap mode for all three coordinates of texture lookups on this layer. This is equivalent to calling cogl_pipeline_set_layer_wrap_mode_s(), cogl_pipeline_set_layer_wrap_mode_t() and cogl_pipeline_set_layer_wrap_mode_p() separately.

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_layer_wrap_mode_s ()

void
cogl_pipeline_set_layer_wrap_mode_s (CoglPipeline *pipeline,
                                     int layer_index,
                                     CoglPipelineWrapMode mode);

Sets the wrap mode for the 's' coordinate of texture lookups on this layer.

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_layer_wrap_mode_t ()

void
cogl_pipeline_set_layer_wrap_mode_t (CoglPipeline *pipeline,
                                     int layer_index,
                                     CoglPipelineWrapMode mode);

Sets the wrap mode for the 't' coordinate of texture lookups on this layer.

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_layer_wrap_mode_p ()

void
cogl_pipeline_set_layer_wrap_mode_p (CoglPipeline *pipeline,
                                     int layer_index,
                                     CoglPipelineWrapMode mode);

Sets the wrap mode for the 'p' coordinate of texture lookups on this layer. 'p' is the third coordinate.

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_layer_combine ()

CoglBool
cogl_pipeline_set_layer_combine (CoglPipeline *pipeline,
                                 int layer_index,
                                 const char *blend_string,
                                 CoglError **error);

If not already familiar; you can refer

strings are and there syntax.

These are all the functions available for texture combining:

Refer to the

describing the arguments. The valid source names for texture combining are:

1

RGBA = MODULATE (PREVIOUS, TEXTURE)

1

RGBA = INTERPOLATE (PREVIOUS, TEXTURE, CONSTANT[A])

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_layer_combine_constant ()

void
cogl_pipeline_set_layer_combine_constant
                               (CoglPipeline *pipeline,
                                int layer_index,
                                const CoglColor *constant);

When you are using the 'CONSTANT' color source in a layer combine description then you can use this function to define its value.

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_layer_matrix ()

void
cogl_pipeline_set_layer_matrix (CoglPipeline *pipeline,
                                int layer_index,
                                const CoglMatrix *matrix);

This function lets you set a matrix that can be used to e.g. translate and rotate a single layer of a pipeline used to fill your geometry.

Since: 1.10

Stability Level: Unstable

cogl_pipeline_set_layer_point_sprite_coords_enabled ()

CoglBool
cogl_pipeline_set_layer_point_sprite_coords_enabled
                               (CoglPipeline *pipeline,
                                int layer_index,
                                CoglBool enable,
                                CoglError **error);

When rendering points, if enable is TRUE then the texture coordinates for this layer will be replaced with coordinates that vary from 0.0 to 1.0 across the primitive. The top left of the point will have the coordinates 0.0,0.0 and the bottom right will have 1.0,1.0. If enable is FALSE then the coordinates will be fixed for the entire point.

This function will only work if COGL_FEATURE_ID_POINT_SPRITE is available. If the feature is not available then the function will return FALSE and set error .

Since: 2.0

Stability Level: Unstable

cogl_pipeline_get_layer_point_sprite_coords_enabled ()

CoglBool
cogl_pipeline_get_layer_point_sprite_coords_enabled
                               (CoglPipeline *pipeline,
                                int layer_index);

Gets whether point sprite coordinate generation is enabled for this texture layer.

Since: 2.0

Stability Level: Unstable

cogl_pipeline_remove_layer ()

void
cogl_pipeline_remove_layer (CoglPipeline *pipeline,
                            int layer_index);

This function removes a layer from your pipeline

Since: 1.10

Stability Level: Unstable

cogl_pipeline_get_n_layers ()

int
cogl_pipeline_get_n_layers (CoglPipeline *pipeline);

Retrieves the number of layers defined for the given pipeline

Since: 2.0

Stability Level: Unstable

CoglPipelineLayerCallback ()

CoglBool
(*CoglPipelineLayerCallback) (CoglPipeline *pipeline,
                              int layer_index,
                              void *user_data);

The callback prototype used with cogl_pipeline_foreach_layer() for iterating all the layers of a pipeline .

Since: 2.0

Stability Level: Unstable

cogl_pipeline_foreach_layer ()

void
cogl_pipeline_foreach_layer (CoglPipeline *pipeline,
                             CoglPipelineLayerCallback callback,
                             void *user_data);

Iterates all the layer indices of the given pipeline .

Since: 2.0

Stability Level: Unstable

cogl_pipeline_get_uniform_location ()

int
cogl_pipeline_get_uniform_location (CoglPipeline *pipeline,
                                    const char *uniform_name);

This is used to get an integer representing the uniform with the name uniform_name . The integer can be passed to functions such as cogl_pipeline_set_uniform_1f() to set the value of a uniform.

This function will always return a valid integer. Ie, unlike OpenGL, it does not return -1 if the uniform is not available in this pipeline so it can not be used to test whether uniforms are present. It is not necessary to set the program on the pipeline before calling this function.

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_uniform_1f ()

void
cogl_pipeline_set_uniform_1f (CoglPipeline *pipeline,
                              int uniform_location,
                              float value);

Sets a new value for the uniform at uniform_location . If this pipeline has a user program attached and is later used as a source for drawing, the given value will be assigned to the uniform which can be accessed from the shader's source. The value for uniform_location should be retrieved from the string name of the uniform by calling cogl_pipeline_get_uniform_location().

This function should be used to set uniforms that are of type float. It can also be used to set a single member of a float array uniform.

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_uniform_1i ()

void
cogl_pipeline_set_uniform_1i (CoglPipeline *pipeline,
                              int uniform_location,
                              int value);

Sets a new value for the uniform at uniform_location . If this pipeline has a user program attached and is later used as a source for drawing, the given value will be assigned to the uniform which can be accessed from the shader's source. The value for uniform_location should be retrieved from the string name of the uniform by calling cogl_pipeline_get_uniform_location().

This function should be used to set uniforms that are of type int. It can also be used to set a single member of a int array uniform or a sampler uniform.

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_uniform_float ()

void
cogl_pipeline_set_uniform_float (CoglPipeline *pipeline,
                                 int uniform_location,
                                 int n_components,
                                 int count,
                                 const float *value);

Sets new values for the uniform at uniform_location . If this pipeline has a user program attached and is later used as a source for drawing, the given values will be assigned to the uniform which can be accessed from the shader's source. The value for uniform_location should be retrieved from the string name of the uniform by calling cogl_pipeline_get_uniform_location().

This function can be used to set any floating point type uniform, including float arrays and float vectors. For example, to set a single vec4 uniform you would use 4 for n_components and 1 for count . To set an array of 8 float values, you could use 1 for n_components and 8 for count .

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_uniform_int ()

void
cogl_pipeline_set_uniform_int (CoglPipeline *pipeline,
                               int uniform_location,
                               int n_components,
                               int count,
                               const int *value);

Sets new values for the uniform at uniform_location . If this pipeline has a user program attached and is later used as a source for drawing, the given values will be assigned to the uniform which can be accessed from the shader's source. The value for uniform_location should be retrieved from the string name of the uniform by calling cogl_pipeline_get_uniform_location().

This function can be used to set any integer type uniform, including int arrays and int vectors. For example, to set a single ivec4 uniform you would use 4 for n_components and 1 for count . To set an array of 8 int values, you could use 1 for n_components and 8 for count .

Since: 2.0

Stability Level: Unstable

cogl_pipeline_set_uniform_matrix ()

void
cogl_pipeline_set_uniform_matrix (CoglPipeline *pipeline,
                                  int uniform_location,
                                  int dimensions,
                                  int count,
                                  CoglBool transpose,
                                  const float *value);

Sets new values for the uniform at uniform_location . If this pipeline has a user program attached and is later used as a source for drawing, the given values will be assigned to the uniform which can be accessed from the shader's source. The value for uniform_location should be retrieved from the string name of the uniform by calling cogl_pipeline_get_uniform_location().

This function can be used to set any matrix type uniform, including matrix arrays. For example, to set a single mat4 uniform you would use 4 for dimensions and 1 for count . To set an array of 8 mat3 values, you could use 3 for dimensions and 8 for count .

If transpose is FALSE then the matrix is expected to be in column-major order or if it is TRUE then the matrix is in row-major order. You can pass a CoglMatrix by calling by passing the result of cogl_matrix_get_array() in value and setting transpose to FALSE.

Since: 2.0

Stability Level: Unstable

cogl_pipeline_add_snippet ()

void
cogl_pipeline_add_snippet (CoglPipeline *pipeline,
                           CoglSnippet *snippet);

Adds a shader snippet to pipeline . The snippet will wrap around or replace some part of the pipeline as defined by the hook point in snippet . Note that some hook points are specific to a layer and must be added with cogl_pipeline_add_layer_snippet() instead.

Since: 1.10

Stability Level: Unstable

cogl_pipeline_add_layer_snippet ()

void
cogl_pipeline_add_layer_snippet (CoglPipeline *pipeline,
                                 int layer,
                                 CoglSnippet *snippet);

Adds a shader snippet that will hook on to the given layer of the pipeline. The exact part of the pipeline that the snippet wraps around depends on the hook that is given to cogl_snippet_new(). Note that some hooks can't be used with a layer and need to be added with cogl_pipeline_add_snippet() instead.

Since: 1.10

Stability Level: Unstable

CoglPipeline

typedef struct _CoglPipeline CoglPipeline;

enum CoglPipelineAlphaFunc

Alpha testing happens before blending primitives with the framebuffer and gives an opportunity to discard fragments based on a comparison with the incoming alpha value and a reference alpha value. The CoglPipelineAlphaFunc determines how the comparison is done.

enum CoglBlendStringError

Error enumeration for the blend strings parser

Since: 1.0

enum CoglPipelineCullFaceMode

Specifies which faces should be culled. This can be set on a pipeline using cogl_pipeline_set_cull_face_mode().

enum CoglWinding

Enum used to represent the two directions of rotation. This can be used to set the front face for culling by calling cogl_pipeline_set_front_face_winding().

enum CoglPipelineFilter

Texture filtering is used whenever the current pixel maps either to more than one texture element (texel) or less than one. These filter enums correspond to different strategies used to come up with a pixel color, by possibly referring to multiple neighbouring texels and taking a weighted average or simply using the nearest texel.

enum CoglPipelineWrapMode

The wrap mode specifies what happens when texture coordinates outside the range 0→1 are used. Note that if the filter mode is anything but COGL_PIPELINE_FILTER_NEAREST then texels outside the range 0→1 might be used even when the coordinate is exactly 0 or 1 because OpenGL will try to sample neighbouring pixels. For example if you are trying to render the full texture then you may get artifacts around the edges when the pixels from the other side are merged in if the wrap mode is set to repeat.

Since: 2.0