encapsulation-limit |
uint32 |
0 |
How many additional levels of encapsulation are permitted to be prepended to packets. This property applies only to IPv6 tunnels. |
flags |
uint32 |
0 |
Tunnel flags. Currently, the following values are supported: NM_IP_TUNNEL_FLAG_IP6_IGN_ENCAP_LIMIT (0x1), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_TCLASS (0x2), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FLOWLABEL (0x4), NM_IP_TUNNEL_FLAG_IP6_MIP6_DEV (0x8), NM_IP_TUNNEL_FLAG_IP6_RCV_DSCP_COPY (0x10), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FWMARK (0x20). They are valid only for IPv6 tunnels. |
flow-label |
uint32 |
0 |
The flow label to assign to tunnel packets. This property applies only to IPv6 tunnels. |
input-key |
string |
|
The key used for tunnel input packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used. |
local |
string |
|
The local endpoint of the tunnel; the value can be empty, otherwise it must contain an IPv4 or IPv6 address. |
mode |
uint32 |
0 |
The tunneling mode, for example NM_IP_TUNNEL_MODE_IPIP (1) or NM_IP_TUNNEL_MODE_GRE (2). |
mtu |
uint32 |
0 |
If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple fragments. |
output-key |
string |
|
The key used for tunnel output packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used. |
parent |
string |
|
If given, specifies the parent interface name or parent connection UUID the new device will be bound to so that tunneled packets will only be routed via that interface. |
path-mtu-discovery |
boolean |
TRUE |
Whether to enable Path MTU Discovery on this tunnel. |
remote |
string |
|
The remote endpoint of the tunnel; the value must contain an IPv4 or IPv6 address. |
tos |
uint32 |
0 |
The type of service (IPv4) or traffic class (IPv6) field to be set on tunneled packets. |
ttl |
uint32 |
0 |
The TTL to assign to tunneled packets. 0 is a special value meaning that packets inherit the TTL value. |
